CB25 is a 64 × 64 mm perforated PVC stucco corner bead for forming straight, protected outside corners in compatible render and plaster systems. The catalog lists a 10 ft standard length and 50 or 100 pieces per box.
CB25 is a 64 × 64 mm perforated PVC stucco corner bead for forming straight, protected outside corners in compatible render and plaster systems. The catalog lists a 10 ft standard length and 50 or 100 pieces per box.
CB25 is a 64 × 64 mm perforated PVC stucco corner bead for forming straight, protected outside corners in compatible render and plaster systems. The catalog lists a 10 ft standard length and 50 or 100 pieces per box.
Buyer shortcut: Send the model or drawing, required length, colour, quantity, application and destination. Reference MOQ: 10,000 m.
Current Small Boss product image for model identification.
64 × 64 mmFlange dimensions
10 ftCatalog standard length
50 / 100Pieces per box
10,000 mReference MOQ for this profile category
Model-specific data
Clean Product Drawing and Searchable Specifications
The visual and table are separated so dimensions do not become mixed with adjacent catalog models.
Clean crop from the supplied English profile catalog. Only data relevant to this product page is shown.
Product model
CB25
Product type
PVC stucco corner bead
Flange dimensions
64 × 64 mm (2-1/2 × 2-1/2 in)
Standard length
10 ft
Packing
50 or 100 pieces per box
Material / colour
PVC; final formulation and colour by confirmed order
Selection boundary: Catalog dimensions support identification and quotation. Final tolerance, formulation, colour, length, packing, compliance and suitability follow the approved drawing, sample and order specification.
Decision points
Why Buyers Specify This Profile
Defined flange coverage
Model-specific legs create a repeatable reference for straight rendered corners.
Perforated keying area
Openings allow the compatible render layer to engage around the flange.
Non-metallic profile
PVC does not form red rust; system compatibility and exposure still require confirmation.
Application fit
Where the Product Fits and What Must Be Confirmed
Exterior stucco corners
For straight outside corners where the approved stucco assembly keys through the perforated flanges.
Interior plaster corners
A non-metallic corner-forming option for compatible plaster and render specifications.
Masonry and sheathing interfaces
Use only after the substrate, lath, base coat and fastener method are confirmed by the project system.
Selection guidance
Choose CB25 when a 64 mm leg is compatible with the specified render build-up. Confirm substrate, coat thickness, fastener spacing, exposure, colour and required length before ordering.
Verified visual references
Product and Application References
Every image in this section comes from the corresponding Small Boss product page or the same verified product category. Pages without a reliable match intentionally omit this gallery.
Completed residential stucco corner referenceExisting Small Boss page image showing finished exterior corner lines.Exterior stucco renovation referenceExisting Small Boss page image showing outside columns and facade corners during renovation.
Installation planning
Four Checks Before the Product Is Concealed or Put into Service
01
Confirm the wall system
Verify substrate, lath or insulation system, finish thickness, opening and movement details.
02
Cut and position
Keep the profile straight and align the nose or ground to the required finished plane.
03
Fix and integrate
Use the approved fastening or base-coat method; maintain required mesh overlap where applicable.
04
Finish and inspect
Check corner line, coating coverage, drainage or sealant details before final acceptance.
Submittal readiness
Information and Documents to Align Before Production
Buyer supplies
Model, dimensioned drawing or physical sample
Application, substrate or equipment interface
Target standard, test method and acceptance criteria
Colour, length, quantity, packing and destination
Confirm with Small Boss
Approved product drawing and sample plan
Tooling, tolerance and material option
Applicable inspection and test documents
Production, packaging and delivery schedule
Manufacturing evidence
Small Boss Profile Manufacturing and Quality-Control Basis
1992Manufacturing origin; legal company registered in 2002
64,314.88 m²Certified building area
150+Production and pilot lines across company categories
350+Employees as of August 5, 2026
>30%R&D personnel share
100+Countries and regions supplied cumulatively
Tongxiang Small Boss Special Plastic Products Co., Ltd. began manufacturing activity in 1992 and was formally registered in 2002. Management systems are certified to ISO 9001, ISO 14001 and ISO 45001. As of July 2026, the company held 73 valid domestic patents and 4 valid international patents.
RFQ checklist
Get a Faster, Technically Relevant Quotation
MOQReference MOQ: 10,000 m
ProductModel/drawing, dimensions, length, colour and quantity
ApplicationEnvironment, loads/service conditions, installation and standard
DeliveryDestination, packaging, required documents and schedule
Use the page inquiry form and attach or describe the drawing and application. A complete RFQ reduces repeated clarification and helps the technical team respond with the correct profile basis.
Technical answers
CB25 PVC Stucco Corner Bead, 64 × 64 mm FAQ
What are the catalog dimensions of CB25?
The English catalog lists 64 × 64 mm flanges, a 10 ft standard length and packing of 50 or 100 pieces per box.
Is CB25 selected only by flange width?
No. The complete stucco or plaster system, coat thickness, substrate, exposure and fastening method must also be confirmed.
Can colour or length be customized?
Custom colour or length can be discussed against the approved sample, tooling, MOQ, packing and delivery plan.
CB25 is a 64 × 64 mm perforated PVC stucco corner bead for forming straight, protected outside corners in compatible render and plaster systems. The catalog lists a 10 ft standard length and 50 or 100 pieces per box.
Buyer shortcut: Send the model or drawing, required length, colour, quantity, application and destination. Reference MOQ: 10,000 m.
Current Small Boss product image for model identification.
64 × 64 mmFlange dimensions
10 ftCatalog standard length
50 / 100Pieces per box
10,000 mReference MOQ for this profile category
Model-specific data
Clean Product Drawing and Searchable Specifications
The visual and table are separated so dimensions do not become mixed with adjacent catalog models.
Clean crop from the supplied English profile catalog. Only data relevant to this product page is shown.
Product model
CB25
Product type
PVC stucco corner bead
Flange dimensions
64 × 64 mm (2-1/2 × 2-1/2 in)
Standard length
10 ft
Packing
50 or 100 pieces per box
Material / colour
PVC; final formulation and colour by confirmed order
Selection boundary: Catalog dimensions support identification and quotation. Final tolerance, formulation, colour, length, packing, compliance and suitability follow the approved drawing, sample and order specification.
Decision points
Why Buyers Specify This Profile
Defined flange coverage
Model-specific legs create a repeatable reference for straight rendered corners.
Perforated keying area
Openings allow the compatible render layer to engage around the flange.
Non-metallic profile
PVC does not form red rust; system compatibility and exposure still require confirmation.
Application fit
Where the Product Fits and What Must Be Confirmed
Exterior stucco corners
For straight outside corners where the approved stucco assembly keys through the perforated flanges.
Interior plaster corners
A non-metallic corner-forming option for compatible plaster and render specifications.
Masonry and sheathing interfaces
Use only after the substrate, lath, base coat and fastener method are confirmed by the project system.
Selection guidance
Choose CB25 when a 64 mm leg is compatible with the specified render build-up. Confirm substrate, coat thickness, fastener spacing, exposure, colour and required length before ordering.
Verified visual references
Product and Application References
Every image in this section comes from the corresponding Small Boss product page or the same verified product category. Pages without a reliable match intentionally omit this gallery.
Completed residential stucco corner referenceExisting Small Boss page image showing finished exterior corner lines.Exterior stucco renovation referenceExisting Small Boss page image showing outside columns and facade corners during renovation.
Installation planning
Four Checks Before the Product Is Concealed or Put into Service
01
Confirm the wall system
Verify substrate, lath or insulation system, finish thickness, opening and movement details.
02
Cut and position
Keep the profile straight and align the nose or ground to the required finished plane.
03
Fix and integrate
Use the approved fastening or base-coat method; maintain required mesh overlap where applicable.
04
Finish and inspect
Check corner line, coating coverage, drainage or sealant details before final acceptance.
Submittal readiness
Information and Documents to Align Before Production
Buyer supplies
Model, dimensioned drawing or physical sample
Application, substrate or equipment interface
Target standard, test method and acceptance criteria
Colour, length, quantity, packing and destination
Confirm with Small Boss
Approved product drawing and sample plan
Tooling, tolerance and material option
Applicable inspection and test documents
Production, packaging and delivery schedule
Manufacturing evidence
Small Boss Profile Manufacturing and Quality-Control Basis
1992Manufacturing origin; legal company registered in 2002
64,314.88 m²Certified building area
150+Production and pilot lines across company categories
350+Employees as of August 5, 2026
>30%R&D personnel share
100+Countries and regions supplied cumulatively
Tongxiang Small Boss Special Plastic Products Co., Ltd. began manufacturing activity in 1992 and was formally registered in 2002. Management systems are certified to ISO 9001, ISO 14001 and ISO 45001. As of July 2026, the company held 73 valid domestic patents and 4 valid international patents.
RFQ checklist
Get a Faster, Technically Relevant Quotation
MOQReference MOQ: 10,000 m
ProductModel/drawing, dimensions, length, colour and quantity
ApplicationEnvironment, loads/service conditions, installation and standard
DeliveryDestination, packaging, required documents and schedule
Use the page inquiry form and attach or describe the drawing and application. A complete RFQ reduces repeated clarification and helps the technical team respond with the correct profile basis.
Technical answers
CB25 PVC Stucco Corner Bead, 64 × 64 mm FAQ
What are the catalog dimensions of CB25?
The English catalog lists 64 × 64 mm flanges, a 10 ft standard length and packing of 50 or 100 pieces per box.
Is CB25 selected only by flange width?
No. The complete stucco or plaster system, coat thickness, substrate, exposure and fastening method must also be confirmed.
Can colour or length be customized?
Custom colour or length can be discussed against the approved sample, tooling, MOQ, packing and delivery plan.
1.Provide one-stop service from raw material to final products which means we can control the quality and cost from the source.
2.More than 120 automated high-speed production lines with an average daily output of 120,000 meters to ensure that your goods are delivered on schedule.
3.More than 30% of R&D technicians and complete laboratory testing equipment provide complete OEM customization services from formula design to mould development.
4.Complete quality management system and strict material standards,our factory has passed IS019001, IS014001, IS045001,raw material is proven compliance with ASTM D4216-9
