BN80 PVC Bullnose Corner Bead for Rounded Drywall Corners
BN80 forms a smooth rounded outside drywall corner with a catalog-listed 23 mm profile height and 55 mm legs. The standard length is 10 ft with 100 pieces per box; compound, fastening and transition details must match the wall system.
BN80 forms a smooth rounded outside drywall corner with a catalog-listed 23 mm profile height and 55 mm legs. The standard length is 10 ft with 100 pieces per box; compound, fastening and transition details must match the wall system.
BN80 PVC Bullnose Corner Bead for Rounded Drywall Corners
BN80 forms a smooth rounded outside drywall corner with a catalog-listed 23 mm profile height and 55 mm legs. The standard length is 10 ft with 100 pieces per box; compound, fastening and transition details must match the wall system.
Buyer shortcut: Send the model or drawing, required length, colour, quantity, application and destination. Reference MOQ: 10,000 m.
Current Small Boss product image for model identification.
23 mmProfile height
55 mmLeg width
10 ftStandard length
10,000 mReference MOQ for this profile category
Model-specific data
Clean Product Drawing and Searchable Specifications
The visual and table are separated so dimensions do not become mixed with adjacent catalog models.
Clean crop from the supplied English profile catalog. Only data relevant to this product page is shown.
Product model
BN80
Product type
PVC bullnose corner bead
Profile height
23 mm
Leg width
55 mm
Standard length
10 ft
Packing
100 pieces per box
Selection boundary: Catalog dimensions support identification and quotation. Final tolerance, formulation, colour, length, packing, compliance and suitability follow the approved drawing, sample and order specification.
Decision points
Why Buyers Specify This Profile
Rounded finish
The 23 mm profile height creates a softer outside-corner geometry.
55 mm legs
Broad legs support a consistent compound transition when correctly installed.
Interior design coordination
Baseboard, opening and square-to-rounded transitions can be planned before order.
Application fit
Where the Product Fits and What Must Be Confirmed
Rounded drywall corners
Creates a softer outside-corner profile than a sharp 90-degree bead.
Residential and hospitality interiors
Useful where a rounded architectural detail is specified for circulation spaces and finished rooms.
Repeated interior details
A consistent profile helps standardize rounded corners across larger fit-out packages when installation templates are controlled.
Selection guidance
Confirm the 23 mm profile height and 55 mm legs against the architectural detail. Coordinate baseboards, trims, openings and any square-to-bullnose transition pieces.
Original technical visual
Installation Detail Illustration
This visual explains product placement and is not presented as a completed Small Boss project case.
BN80 rounded drywall corner installationOriginal installation illustration showing the BN80 bullnose geometry seated on a gypsum-board outside corner before final compound finishing.
HOW TO USE THIS VISUAL
Confirm the exposed profile before it is concealed
Use the illustration together with the clean product drawing and searchable specification table above. Substrate, fixing, compatible compound or base coat, reinforcement overlap, movement joints, sealant and drainage details remain project-specific.
Disclosure: Original technical illustration created for product-selection guidance. It is not a photograph of a documented customer project.
Installation planning
Four Checks Before the Product Is Concealed or Put into Service
01
Check board corners
Confirm board alignment, corner angle and substrate condition.
02
Fit the bead
Cut cleanly, position the profile and coordinate transitions at openings and baseboards.
03
Attach to system instructions
Use the approved compound, adhesive or fastening method and maintain straightness.
04
Apply finish coats
Build and feather the joint compound to the specified finish level, then inspect after drying.
Submittal readiness
Information and Documents to Align Before Production
Buyer supplies
Model, dimensioned drawing or physical sample
Application, substrate or equipment interface
Target standard, test method and acceptance criteria
Colour, length, quantity, packing and destination
Confirm with Small Boss
Approved product drawing and sample plan
Tooling, tolerance and material option
Applicable inspection and test documents
Production, packaging and delivery schedule
Manufacturing evidence
Small Boss Profile Manufacturing and Quality-Control Basis
1992Manufacturing origin; legal company registered in 2002
64,314.88 m²Certified building area
150+Production and pilot lines across company categories
350+Employees as of August 5, 2026
>30%R&D personnel share
100+Countries and regions supplied cumulatively
Tongxiang Small Boss Special Plastic Products Co., Ltd. began manufacturing activity in 1992 and was formally registered in 2002. Management systems are certified to ISO 9001, ISO 14001 and ISO 45001. As of July 2026, the company held 73 valid domestic patents and 4 valid international patents.
RFQ checklist
Get a Faster, Technically Relevant Quotation
MOQReference MOQ: 10,000 m
ProductModel/drawing, dimensions, length, colour and quantity
ApplicationEnvironment, loads/service conditions, installation and standard
DeliveryDestination, packaging, required documents and schedule
Use the page inquiry form and attach or describe the drawing and application. A complete RFQ reduces repeated clarification and helps the technical team respond with the correct profile basis.
Technical answers
BN80 PVC Bullnose Corner Bead for Rounded Drywall Corners FAQ
Is 23 mm the bullnose radius?
The catalog labels 23 mm as profile height and 55 mm as leg width; it does not label 23 mm as a radius.
What is the standard BN80 length?
The catalog lists 10 ft and 100 pieces per box.
What details should be coordinated?
Coordinate the corner geometry, compound system, baseboard, opening returns and square-to-rounded transitions.
BN80 PVC Bullnose Corner Bead for Rounded Drywall Corners
BN80 forms a smooth rounded outside drywall corner with a catalog-listed 23 mm profile height and 55 mm legs. The standard length is 10 ft with 100 pieces per box; compound, fastening and transition details must match the wall system.
Buyer shortcut: Send the model or drawing, required length, colour, quantity, application and destination. Reference MOQ: 10,000 m.
Current Small Boss product image for model identification.
23 mmProfile height
55 mmLeg width
10 ftStandard length
10,000 mReference MOQ for this profile category
Model-specific data
Clean Product Drawing and Searchable Specifications
The visual and table are separated so dimensions do not become mixed with adjacent catalog models.
Clean crop from the supplied English profile catalog. Only data relevant to this product page is shown.
Product model
BN80
Product type
PVC bullnose corner bead
Profile height
23 mm
Leg width
55 mm
Standard length
10 ft
Packing
100 pieces per box
Selection boundary: Catalog dimensions support identification and quotation. Final tolerance, formulation, colour, length, packing, compliance and suitability follow the approved drawing, sample and order specification.
Decision points
Why Buyers Specify This Profile
Rounded finish
The 23 mm profile height creates a softer outside-corner geometry.
55 mm legs
Broad legs support a consistent compound transition when correctly installed.
Interior design coordination
Baseboard, opening and square-to-rounded transitions can be planned before order.
Application fit
Where the Product Fits and What Must Be Confirmed
Rounded drywall corners
Creates a softer outside-corner profile than a sharp 90-degree bead.
Residential and hospitality interiors
Useful where a rounded architectural detail is specified for circulation spaces and finished rooms.
Repeated interior details
A consistent profile helps standardize rounded corners across larger fit-out packages when installation templates are controlled.
Selection guidance
Confirm the 23 mm profile height and 55 mm legs against the architectural detail. Coordinate baseboards, trims, openings and any square-to-bullnose transition pieces.
Original technical visual
Installation Detail Illustration
This visual explains product placement and is not presented as a completed Small Boss project case.
BN80 rounded drywall corner installationOriginal installation illustration showing the BN80 bullnose geometry seated on a gypsum-board outside corner before final compound finishing.
HOW TO USE THIS VISUAL
Confirm the exposed profile before it is concealed
Use the illustration together with the clean product drawing and searchable specification table above. Substrate, fixing, compatible compound or base coat, reinforcement overlap, movement joints, sealant and drainage details remain project-specific.
Disclosure: Original technical illustration created for product-selection guidance. It is not a photograph of a documented customer project.
Installation planning
Four Checks Before the Product Is Concealed or Put into Service
01
Check board corners
Confirm board alignment, corner angle and substrate condition.
02
Fit the bead
Cut cleanly, position the profile and coordinate transitions at openings and baseboards.
03
Attach to system instructions
Use the approved compound, adhesive or fastening method and maintain straightness.
04
Apply finish coats
Build and feather the joint compound to the specified finish level, then inspect after drying.
Submittal readiness
Information and Documents to Align Before Production
Buyer supplies
Model, dimensioned drawing or physical sample
Application, substrate or equipment interface
Target standard, test method and acceptance criteria
Colour, length, quantity, packing and destination
Confirm with Small Boss
Approved product drawing and sample plan
Tooling, tolerance and material option
Applicable inspection and test documents
Production, packaging and delivery schedule
Manufacturing evidence
Small Boss Profile Manufacturing and Quality-Control Basis
1992Manufacturing origin; legal company registered in 2002
64,314.88 m²Certified building area
150+Production and pilot lines across company categories
350+Employees as of August 5, 2026
>30%R&D personnel share
100+Countries and regions supplied cumulatively
Tongxiang Small Boss Special Plastic Products Co., Ltd. began manufacturing activity in 1992 and was formally registered in 2002. Management systems are certified to ISO 9001, ISO 14001 and ISO 45001. As of July 2026, the company held 73 valid domestic patents and 4 valid international patents.
RFQ checklist
Get a Faster, Technically Relevant Quotation
MOQReference MOQ: 10,000 m
ProductModel/drawing, dimensions, length, colour and quantity
ApplicationEnvironment, loads/service conditions, installation and standard
DeliveryDestination, packaging, required documents and schedule
Use the page inquiry form and attach or describe the drawing and application. A complete RFQ reduces repeated clarification and helps the technical team respond with the correct profile basis.
Technical answers
BN80 PVC Bullnose Corner Bead for Rounded Drywall Corners FAQ
Is 23 mm the bullnose radius?
The catalog labels 23 mm as profile height and 55 mm as leg width; it does not label 23 mm as a radius.
What is the standard BN80 length?
The catalog lists 10 ft and 100 pieces per box.
What details should be coordinated?
Coordinate the corner geometry, compound system, baseboard, opening returns and square-to-rounded transitions.
1.Provide one-stop service from raw material to final products which means we can control the quality and cost from the source.
2.More than 120 automated high-speed production lines with an average daily output of 120,000 meters to ensure that your goods are delivered on schedule.
3.More than 30% of R&D technicians and complete laboratory testing equipment provide complete OEM customization services from formula design to mould development.
4.Complete quality management system and strict material standards,our factory has passed IS019001, IS014001, IS045001,raw material is proven compliance with ASTM D4216-9
